#ipsec.conf
freeswan-netgearfwag114
	#Example connection to netgear fwag114 router
	#right=freeswan side
	#left=netgear side
        type=tunnel
        esp=3des-md5
        right=100.200.200.3
        rightnexthop=100.200.200.2
        rightsubnet=192.168.2.0/24
        #rightespenckey="alskeodkfjghturj4i5k3k2l"
        rightespenckey=0x616C736B656F646B666A67687475726A3469356B336B326C
        rightespspi=0x121
        #rightespauthkey="fvnghteidk45j6k7"
        rightespauthkey=0x66766E6768746569646B34356A366B37
        left=30.40.50.5
        leftnexthop=30.40.50.2
        leftsubnet=192.168.0.0/24
        #leftespenckey="gjfkri5rt6yghy67u8hgtjrk"
        leftespenckey=0x676A666B72693572743679676879363775386867746A726B
        spi=0x120
        #leftespauthkey="tgfh4k5l6kyhgiol"
        leftespauthkey=0x74676668346B356C366B796867696F6C
        pfs=no
        auto=add
	#
	#FWAG117 -> VPN Policies
	#General
	#PolicyName: testconn
	#Remote VPN Endpoint: Address Type: IP Address
	#                     Address Data: 100.200.200.3
        #Trafic Selector
	#Local IP	Any
	#Remote IP	Subnet address
	#	Start IP Address: 192.168.2.0
	#            Subnet Mask: 255.255.255.0
	#AH Configuration
	#   --- Didn't setup ---
	#
	#ESP Configuration
	#SPI Incoming 120
	#SPI Outgoing 121
	#(x)Enable Encryption	Encryption Algorithm: 3DES
	#                        Key-in: gjfkri5rt6yghy67u8hgtjrk
	#                       Key-Out: alskeodkfjghturj4i5k3k2l
	#
	#(x)Enable Authentication  Authentication Algorithm: MD5
	#                        Key-in: tgfh4k5l6kyhgiol
	#                       Key-Out: fvnghteidk45j6k7
	#
	#(x)NETBIOS Enable